Loading... Please wait...
USA: 800-223-3977 Fax: 847-991-8924

Currency Displayed in

Categories

Heated Sample Line

Hover over image to zoom

  • 100 Foot Heated Sample Line with Temperature Controller
  • 10 Foot Heated Sample Line with Temperature Controller
  • Close up on Sample line and Calibration line
  • Close up on 1/4" PTFE calibration line with spirally-cut cable wrap
  • Heated Sample Line Test Station
$1,019.20
SKU:
072310

 Product Description

Heated Sample Lines

Heated Sample Line (CEMS, Rata)These heated sample lines feature an electrically heat traced and insulated 3/8" Teflon ® PTFE (.030 Wall) sample line with a stainless steel over braid and stainless steel tube ends, a 1/4 Teflon ® PTFE (.040) calibration line, 3 pin Amphenol power connector, and 2 type K thermocouple plugs. Protected by a durable scuff resistant extruded polyurethane jacket. *Temperature controller sold separately. *These Heated Sample Lines are not self limiting; a temperature controller is required.

Heated Sample Lines are used with:

Heavy Duty versus Standard Heated Sample Line

      • Note: Heavy Duty Heated Sample Lines HD are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of -20°F.
      • Note: Standard Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at an ambient temperature of 0°F.

Stainless Steel FittingsHeated Sample Line Features:

  • Rated for 400 º F continuous operation at -20 º F ambient temperature
  • Triple insulation maintains temperature of line with less power consumption. (Heavy Duty)
  • Lower resistance heaters requires less power to heat lines.
  • A backup type K thermocouple to prevent project delays in the case of primary thermocouple failure in the field.
  • Stainless steel over braid and stainless steel tube ends for the sample line to prevent abrasive failure in the field. Optional stainless steel over braid for protection of calibration line from abrasive failure in the field.
  • Durable extruded poly-urethane jacket for protection of sample/calibration lines from abrasive failure in the field.
  • Inert teflon ® PTFE sample and calibration lines will provide more accurate results by eliminating potential bias from other materials. Teflon is also more corrosion resistant than tygon, and can be washed with acetone without degradation.
    Part Number
    Voltage
    Watts
    Length FT
    Amp.
    0723-10
    120
    300
    10' Heated Sample Line
    2.73
    0723-25
    120
    750
    25' Heated Sample Line
    6.82
    0723-50
    120
    1500
    50' Heated Sample Line
    13.64
    0723-100
    120
    2500
    100' Heated Sample Line
    22.73
    *0723-100HD
    120
    3000
    100' Heavy Duty Heated Sample Line
    27
    0723-100220
    120/240
    N/A
    100' Dual Voltage Heated Sample Line
    N/A
    Universal Temperature Controller
    Custom lengths, voltage, and configuration available*Heavy Duty Heated Sample Lines are manufactured to have a continuous operating temperature of 400°F (~204°C) at -20°F ambient temperature.These Heated Sample Lines may be rented through CleanAir Rental
    heatedsampleline.jpg

    Heated Sample Line Close

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

 

What's News

newsletter

Official PayPal Seal

Copyright 2015 CleanAir® Engineering Express Online Store. All Rights Reserved.
 Sitemap | USA 800-223-3977 Fax: 847-991-8924

Click the button below to add the Heated Sample Line to your wish list.